Discover TEON heat pumps for buildings, designed for your comfort and savings. Available in Water, Ground and Air versions, they have a nominal heat output from 60 to 350kW.

.

>> DISCOVER THE RANGE

How much can you save?

TEON heat pumps in the Professional range use for the most part heat extracted from natural, nexhaustible and free sources such as diffuse geothermy energy or air. Only about 20÷25% of the heat offered to the system is electrical absorption. Thanks to the technology developed, they ensure savings ranging from 50% compared to natural gas boilers, up to 70% for oil, LPG or BTZ boilers, also depending on the contractual price levels of the commodities in the relative country.
Compared to Natural Gas on average
Compared to LPG on average
Compared to Oil on average

Why are they good for you and the environment?

Today, heating boilers are the main source of pollution in urban areas, far above traffic. Boilers in fact burn fossil fuel (gas, oil, LPG) or biomass to produce heat, and do so right where you live. With heat pumps in the Professionale range, no combustion takes place: no fuel is burnt, no fine dust or carbon dioxide are emitted where you live or work.

The heat pump is a more efficient technology than the boiler because it does not 'produce' thermal energy by burning fuel, but 'extracts' it from nature (air, water and ground) using electricity efficiently. To make 100 units of heat energy available in the room, a boiler must burn approx. 120 units of chemical energy of fossil fuel or biomass. High-temperature heat pumps, on the other hand, use only 20÷25 units of electrical energy (with zero in-loco emissions) and recover the rest from the environment.
TEON heat pumps use natural refrigerants and not fluorinated gases (F-Gas) or HFOs (bearing the consequences of PFAS), which are highly climate-altering. Furthermore, they operate at extremely low pressures compared to conventional heat pumps, ensuring maximum safety, reliability and durability,
This implies minimal machine maintenance.

Come si integrano nell'impianto esistente?

  • 01
    RADIATORI
  • 02
    RISCALDAMENTO A PAVIMENTO
  • 03
    FOTOVOLTAICO
Le pompe di calore TEON si adattano perfettamente a un utilizzo con i classici radiatori, fornendo una temperatura sino a 80°C quando richiesto. Non è quindi necessario spendere in ristrutturazioni onerose di tutto l’impianto di riscaldamento e dei terminali.
Le pompe di calore possono essere utilizzate anche con il riscaldamento a pavimento a bassa temperatura e con prestazioni amplificate.
Hai già un impianto fotovoltaico? Fotovoltaico e pompa di calore TEON sono i partner ideali per l’autogenerazione dell’energia domestica a costo zero.

How do they integrate into large building systems?

TEON heat pumps in the Centralised range for large buildings can be installed on any type of heating (or even cooling) system . This means that they fit perfectly with classic radiators, providing temperatures up to 80°C when required They do not necessarily require an underfloor system or an increase in radiant surface area, avoiding costly and intrusive renovations.

At the same time they can be installed on fan coil heaters (fancoils) where summer cooling is produced in addition to heating.

If the building is equipped with a photovoltaic system, TEON heat pumps optimise its use, further reducing the energy bill.

Products

The Professional Range includes models with a nominal heat output of 60, 115, 250 and 350 kWt, which can use groundwater (or any surface aquifer), ground or air as a natural energy source, in the Water, Ground and Air versions (up to size 250)respectively. Heat is extracted from these sources via open loop or closed loop probes, or via an external dry cooler. The Professional Range is intended for centralised heating and/or DHW production in medium to large volumes, with priority or simultaneous operation. They are designed to raise the temperature up (and beyond if needed) to 80°C and are equipped with temperature sliding to optimise efficiency in all weather conditions. Moreover, thanks to the high temperatures that can be reached, the models in this range are able to operate anti-legionella thermal shocks without the aid of electric resistors.

  • 01
    RADIATORI
  • 02
    RISCALDAMENTO A PAVIMENTO
  • 03
    FOTOVOLTAICO
T10, T30 e T60 si adattano perfettamente a un utilizzo con i classici termosifoni, fornendo una temperatura sino a 80°C quando richiesto. Non è quindi necessario spendere in ristrutturazioni onerose di tutto l’impianto di riscaldamento e dei terminali. Un’altra differenza consiste nel refrigerante termovettore: T10 e T30 non usano F-GAS o HCFC (ovvero i comuni R134A- R410A-R417A) banditi per la loro tossicità e l’effetto climalterante, bensì refrigeranti naturali.
T10, T30 e T60 possono essere utilizzate anche con il riscaldamento a pavimento a bassa temperatura e con prestazioni amplificate.
Se presente un impianto fotovoltaico con eventuale accumulo, le pompe di calore TEON aumentano la loro efficienza, poiché possono utilizzare al meglio l’energia elettrica autoprodotta.

Can we help you?

From centralised condominium systems to large commercial and industrial facilities: fill in the form to be contacted and get more information on solutions dedicated to the professional sector.
*All fields are mandatory
Edit Template